The floor mounted jib crane , also known as the pillar jib crane or free standing jib crane, whichis composed of a column, a slewing arm slewing drive device and an electric hoist. The lower end of the column is fixed on the concrete foundation by the anchor bolt, and the cycloid reducer is used to drive the cantilever slewing. The electric hoist runs in a straight line on the cantilever I-beam and lifts heavy objects.
Pillar jib crane is a kind of middle and small lifting and equipment developed recently and very suitable for short distance moving and workplace of crowed lift and transportations. Free standing jib cranes are designed to stand on the land not by any other support but by themselves. It consists of a pivoting vertical column and a horizontal load supporting boom. We rely on not low jib cranes price but the high quality of free standing jib cranes to win to achieve the growing of our company.
Environmental conditions of floor mounted jib crane:
1.The power of the crane is three-phase AC, rated frequency of 50HZ, rated voltage of 380V.
2.The altitude of the crane installation site is less than 2000m.
3. Inflammable, explosive and corrosive gases are forbidden in the installation site of the crane.
4. The crane is not allowed to lift the molten metal, toxic and inflammable and explosive materials.
Pillar is made of sturdy, hollow steel sections
Jib arm is made of I-beam or weld steel box, depends on capacity and duty group.
Bolted end connection plate for rapid mounting
Safety anchoring with ribbed pillar base
Low-build profile section jib arm for optimized hook height
Power supply via slip-rings for infinite 360 degree slewing.
Complete with electrical systems including lockable mains switch and power supply to the hoist
Electrical equipment with class F insulation, protection type IP 54
Operated from floor level via pendant controls
Working with CD/MD electric hoist or chain hoist
Low headroom offers optimal highest hook position
Optional electric slewing gear
Optional electric hoist travel
Optional mobile control (standard with wire rope hoists)
Item Code | Rated Capacity | Lifting Speed | Arm Length | Max. Slewing radius | mini Slewing radius | lifting height | total height |
KGS | high/low | mm | mm | mm | mm | mm | |
BZ0.25t-5m | 250 | 8/2 | 5200 | 5000 | 900 | 3000 | 3740 |
BZ0.5t-m5 | 500 | 4/1 | 5200 | 5000 | 950 | 3000 | 3870 |
BZ1t-5m | 1000 | 8/2 | 5200 | 5000 | 1050 | 3000 | 4050 |
BZ2t-5m | 2000 | 4/1 | 5200 | 5000 | 1300 | 3000 | 4210 |
BZ3t-5m | 3000 | 8 | 5300 | 5000 | 1600 | 3000 | 4690 |
BZ5t-5m | 5000 | 8 | 5300 | 5000 | 1700 | 3000 | 4960 |
