Scrap handling cranes widely used in metallurgy industry, mining industry, machinery industry and transportation industry etc, The scrap handling crane is a heavy duty double girder overhead crane that can be configured with lifting magnets or hydraulic grabs to load scrap and then transport it to the melting shop.We provide you with specialized scrap handling cranes to increase your productivity and safety.
 |  |
Scrap handling electromagnetic overhead crane Load capacity: 5-50t Span: 10.5-31.5 m Lifting height: 6-16m Lifting speed: 7.8-15.5m/min Trolley running speed: 31.3-40.1m/min Crane running speed: 58.5-70.6m/min Work duty: A5-A7 | Scrap handling hydraulic grab overhead crane Load capacity: 5-20t Span: 10.5-31.5m Lifting height: 6-26m Lifting speed: 30.7-39.3m/min Trolley running speed: 31.1-44.6m/min Crane running speed: 76.9-93.6m/min Work duty: A5-A7 |
Lifting material: cast ingot, steel scraps, steel ball, steel billets
Wide use in steel plants, melting plant, waste warehouse, billet processing workshop
High working efficiency, safe and reliable operation
Perfect performance, low maintenance
Scrap handling electromagnetic overhead crane mainly consists of strong bridge beams, crane travelling mechanism, electric trolley and electric system and magnetic disk system, and could be classified into several working duties, e.g. A5, A6, A7, according to the working frequency and pure working time
It is special magnetic pole is suitable for round coil with different diameters; selection of electromagnet depends on the length of round coil. If the electromagnet is long enough at a time
Scrap handling hydraulic grab overhead crane is the core equipment of the garbage feeding system in the municipal solid waste incineration plant, which is located above the garbage storage pit. Normally there will install 2 sets same specification garbage grab crane for feeding the boiler, mixing, stacking, moving, weighing and stirring, and make sure garbage materials into the boiler evenly.
QC Model Scrap Handling Electromagnetic EOT Crane | |||||||||||
Lifting Capacity | T | 5t | 10t | 16t | |||||||
Working Duty | A6 | ||||||||||
Span | m | 7.5~31.5m | |||||||||
Max. Lifting Height | m | 16 | 16 | 16 | |||||||
Electromagnetic disk | Type | MW1-6 | MW1-16 | MW1-16 | MW1-16 | ||||||
Suck weight | kg | 4540 | 3330 | 8330 | 14330 | ||||||
Dead weight | 460 | 1670 | 1670 | 1670 | |||||||
Diameter | mm | 776 | 1180 | 1180 | 1180 | ||||||
Lifting Capacity | T | 16/3.2 | 20/5 | 32/5 | |||||||
Electromagnetic disk | Type | MW5-165L6 | MW5-180L | MW5-210L | |||||||
Suck weight | kg | 12500 | 14500 | 21000 | |||||||
Dead weight | 3200 | 4230 | 7000 | ||||||||
Diameter | mm | 1650 | 1800 | 21000 | |||||||
Lifting Capacity | T | 50/10 | |||||||||
Electromagnetic disk | Type | MW5-90L | |||||||||
Suck weight | kg | 4200 | |||||||||
Dead weight | 800 | ||||||||||
Diameter | mm | 900 | |||||||||
Steel track recommended | QU70 | ||||||||||
Power Supply | By your country 3phs voltage | ||||||||||
| Volume (m3) | Motor 40%ED (kw) | Crane SWL (t) | Grab Weight (kg) |
| 0.5 | 7.3 | 2.5 | 945 |
| 1 | 7.3 | 3 | 1490 |
| 2 | 10 | 5 | 1540 |
| 2.5 | 10 | 6.3 | 2825 |
| 3 | 14.5 | 10 | 3040 |
